Are you looking for a quote on T-UPX1? If so, please fill out the provided quote form below. The NSN (national stock number) is 3130012954087, and the part T-UPX1 is bearing unit ball by Zimmerman Industries Inc. Please enter the given detail as much as possible, this information will help us to provide you the right quote to fulfill your needs. We will get back to you in less than 15 minutes!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-01-295-4087 Item Description: Bearing Unit Ball | 3130 | 012954087 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| T-Upx1 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABGC | SLOT WIDTH | 0.875 INCHES NOMINAL |
| ABGD | SLOT LENGTH | 1.375 INCHES NOMINAL |
| ABGF | GROOVE WIDTH | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.750 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 1.0000 INCHES NOMINAL |
| AFWC | HOUSING HEIGHT | 3.562 INCHES NOMINAL |
| AFWD | HOUSING LENGTH | 0.718 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 3.125 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | 1.125 INCHES NOMINAL |
| AKRF | SEAL TYPE | CONTACT AND LABYRINTH |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 2.188 INCHES NOMINAL |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 95.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | DIRECT |
| CWHS | DISTANCE BETWEEN GROOVES | 2.620 INCHES MINIMUM AND 2.630 INCHES MAXIMUM |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | IRON HOUSING |
| MATT | MATERIAL | PLASTIC POLYAMIDE SEAL |
| MATT | MATERIAL | STEEL BEARING |
| STYL | STYLE DESIGNATOR | FRAME TYPE |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Are you looking for quote within 15 minutes for your desired part? Fill an instant form and receive lowest price quote guaranteed.
Request for Quote
