Are you looking for a quote on 356A1409? If so, please fill out the provided quote form below. The NSN (national stock number) is 5962015203143, and the part 356A1409 is microcircuit linear by Analog Devices Inc. Please enter the given detail as much as possible, this information will help us to provide you the right quote to fulfill your needs. We will get back to you in less than 15 minutes!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5962-01-520-3143 Item Description: MICROCIRCUIT,LINEAR | 5962 | 015203143 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 356A1409 | 5 | 9 | D |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADAQ | BODY LENGTH | 0.295 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.212 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.070 INCHES NOMINAL |
| AFGA | OPERATING TEMP RANGE | -55.0/+125.0 DEG CELSIUS |
| AGAV | END ITEM IDENTIFICATION | C-17A |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC SENSITIVE AND LOW POWER AND HIGH SPEED AND SELECTED ITEM |
| CQSJ | INCLOSURE MATERIAL | PLASTIC |
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| CQZP | INPUT CIRCUIT PATTERN | QUAD 2 INPUT AND QUAD 3 INPUT |
| CRTL | CRITICALITY CODE JUSTIFICATION | CBBL |
| CSSL | DESIGN FUNCTION AND QUANTITY | 4 SWITCH, SINGLE POLE DOUBLE THROW |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | MICROCIRCUIT, PLASTIC ENCAPSULATED (SURFACE MOUNT - PROCUREMENT AND SELECTION REQUIREMENTS (FOR ANALOG SWITCH) |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 44.0 VOLTS MAXIMUM TOTAL SUPPLY |
| FEAT | SPECIAL FEATURES | LOW 0N-RESISTANCE, BREAK BEFORE MAKE, ANALOG SIGNAL RANGE EXTENDS TO SUPPLY VOLTAGE RAILS |
| SPCL | SPECIAL TEST FEATURES | ADG333ABSR IS 100 PERCENT UPSCREENED PER PARA 3.1.1 OF DWG 89954/356A1407 BY APPROVED TEST FACILITY FOR OPERATION INTEMPERATURES OF -55C TO +125C. |
| TEST | TEST DATA DOCUMENT | 89954-356A1407 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
| TTQY | TERMINAL TYPE AND QUANTITY | 20 GULLWING |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Are you looking for quote within 15 minutes for your desired part? Fill an instant form and receive lowest price quote guaranteed.
Request for Quote
