Are you looking for a quote on 240-3111662-8? If so, please fill out the provided quote form below. The NSN (national stock number) is 5305004750673, and the part 240-3111662-8 is screw machine by Bae Systems Technology Solutions And Services Inc Dba Bae Systems Information And. Please enter the given detail as much as possible, this information will help us to provide you the right quote to fulfill your needs. We will get back to you in less than 15 minutes!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-475-0673 Item Description: Screw Machine | 5305 | 004750673 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 240-3111662-8 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MACHINE | AAJD | THREAD CLASS3A |
| MACHINE | AAJF | THREAD DIRECTIONRIGHT-HAND |
| MACHINE | AASA | THREAD LENGTH0 362 INCHES MINIMUM AND 0 440 INCHES MAXIMUM |
| MACHINE | AASB | FASTENER LENGTH0 640 INCHES MINIMUM AND 0 687 INCHES MAXIMUM |
| MACHINE | AASK | HEAD STYLEFLAT COUNTERSUNK |
| MACHINE | AASL | HEAD DIAMETER0 447 INCHES MINIMUM AND 0 507 INCHES MAXIMUM |
| MACHINE | ABQZ | INTERNAL DRIVE STYLECROSS RECESS TYPE 1 |
| MACHINE | AHYM | NOMINAL THREAD DIAMETER0 250 INCHES |
| MACHINE | CMLP | THREAD QUANTITY PER INCH28 |
| MACHINE | CQBC | MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH |
| MACHINE | CQFM | HARDNESS RATING26 0 ROCKWELL C MINIMUM AND 32 0 ROCKWELL C MAXIMUM |
| MACHINE | CRSQ | COUNTERSINK ANGLE99 0 DEGREES MINIMUM AND 101 0 DEGREES MAXIMUM |
| MACHINE | CYAU | SCREW MATERIALSTEEL COMP 8630 OR STEEL COMP 4037 |
| MACHINE | CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 6300 ASSN STD 2ND MATERIAL RESPONSE |
| MACHINE | CYBA | SCREW SURFACE TREATMENTCADMIUM |
| MACHINE | CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416TY 1CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| MACHINE | FEAT | SPECIAL FEATURESTWO SLOTS CUT IN THD END 90 DEG APART 0 065 IN MIN 0 067 IN MAX W BY 0 100 IN DEEP |
| MACHINE | THSD | THREAD SERIES DESIGNATORUNF |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Are you looking for quote within 15 minutes for your desired part? Fill an instant form and receive lowest price quote guaranteed.
Request for Quote
