Are you looking for a quote on A-A-59334TY2STBSW10SZ20? If so, please fill out the provided quote form below. The NSN (national stock number) is 3416001864086, and the part A-A-59334TY2STBSW10SZ20 is lathe engine by Caro Inc. Please enter the given detail as much as possible, this information will help us to provide you the right quote to fulfill your needs. We will get back to you in less than 15 minutes!
| MRC | Criteria | Characteristic |
|---|---|---|
| BTTG | SWING OVER CROSS SLIDE | 5.875 INCHES NOMINAL |
| BTWB | THREAD CHANGE QUANTITY | 48 |
| BTWL | HEADSTOCK DRIVE TYPE | STEP CONE PULLEY, BACK GEARED |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY PACS BTST,BTTB AND PACS FOR ELECTRIC MOTOR DATA |
| SR-5 | MANUFACTURERS CODE | 55985 |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 0.50 |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| ELEC | VOLTAGE IN VOLTS | 110.0 |
| AKSL | PURPOSE FOR WHICH DESIGNED | TOOLROOM |
| ACDC | CURRENT TYPE | AC |
| SR-5 | DESIGN CONTROL REFERENCE | 8199AN |
| FAAZ | PHASE | SINGLE |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND OR POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND OR POWER |
| BTYT | CARRIAGE FEED CHANGE QUANTITY | 48 |
| BTZR | THREAD QUANTITY RANGE | 4.0 TO 224.0 PER INCH |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | NONE SPECIFIED |
| AGLD | PERFORMANCE TYPE | LIGHT DUTY |
| APGF | DESIGN TYPE | SCREW |
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | A-A-59334TY2STBSW10SZ20 |
| AWHA | BED TYPE | SOLID |
| SR-1 | MANUFACTURERS CODE | 58536 |
| SR-5 | THE MANUFACTURERS DATA | |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| AAXX | MOUNTING TYPE | BENCH |
| BTSZ | SPINDLE SPEED QUANTITY | 6 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 25.0 TO 500.0 |
| BTTD | RATED SWING | 10.000 INCHES NOMINAL |
| BTTF | ACTUAL SWING OVER BED | 10.125 INCHES NOMINAL |
| BTWM | HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 2 MORSE |
| ADQR | CENTER TO CENTER DISTANCE | 20.000 INCHES NOMINAL |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | 1.000 INCHES NOMINAL |
| BTYW | GEAR CHANGE TYPE | QUICK |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Are you looking for quote within 15 minutes for your desired part? Fill an instant form and receive lowest price quote guaranteed.
Request for Quote
