Are you looking for a quote on RPB1 2? If so, please fill out the provided quote form below. The NSN (national stock number) is 3130007248200, and the part RPB1 2 is bearing unit ball by Control Data Systems Inc. Please enter the given detail as much as possible, this information will help us to provide you the right quote to fulfill your needs. We will get back to you in less than 15 minutes!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-00-724-8200 Item Description: Bearing Unit Ball | 3130 | 007248200 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Rpb1 2 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | 0.3750 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.5000 INCHES NOMINAL |
| ACYB | BASE THICKNESS | 0.1000 INCHES NOMINAL |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 3.0000 INCHES NOMINAL |
| AFWC | HOUSING HEIGHT | 1.9844 INCHES NOMINAL |
| AFWD | HOUSING LENGTH | 0.8500 INCHES NOMINAL |
| AGNF | BASE LENGTH | 0.9628 INCHES NOMINAL |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHZC | ASSEMBLY OVERALL LENGTH | 1.4940 INCHES NOMINAL |
| AKRF | SEAL TYPE | CONTACT |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | ONE END |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| MATT | MATERIAL | STEEL HOUSING |
| MATT | MATERIAL | STEEL SEAL |
| SFTT | SURFACE TREATMENT | PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK, SEPARABLE WITH INNERLINER |
| AFWE | HOUSING WIDTH | 3.8750 INCHES NOMINAL |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AMCL | BLOCK TYPE | FIXED |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 1.0000 INCHES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | ECCENTRIC CAM LOCKING COLLAR |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Are you looking for quote within 15 minutes for your desired part? Fill an instant form and receive lowest price quote guaranteed.
Request for Quote
