Are you looking for a quote on APH1-2? If so, please fill out the provided quote form below. The NSN (national stock number) is 5905009989038, and the part APH1-2 is resistor variable w by Data Instruments Inc. Please enter the given detail as much as possible, this information will help us to provide you the right quote to fulfill your needs. We will get back to you in less than 15 minutes!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-998-9038 Item Description: Resistor Variable W | 5905 | 009989038 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Aph1-2 | 2 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | III OVERALL LENGTH | 1.093 INCHES MINIMUM AND 1.187 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.281 INCHES MINIMUM AND 0.343 INCHES MAXIMUM |
| ADAP | MOUNTING BUSHING LENGTH | 0.266 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.453 INCHES MINIMUM AND 0.485 INCHES MAXIMUM |
| ADAV | III OVERALL DIAMETER | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CW |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | LOCKING BUSHING |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.5 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 320.0 NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 60.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 78626-30343 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWIN |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Are you looking for quote within 15 minutes for your desired part? Fill an instant form and receive lowest price quote guaranteed.
Request for Quote
