Are you looking for a quote on NSP-235? If so, please fill out the provided quote form below. The NSN (national stock number) is 5905011633933, and the part NSP-235 is resistor variable nonwire wound precision by Data Instruments Inc. Please enter the given detail as much as possible, this information will help us to provide you the right quote to fulfill your needs. We will get back to you in less than 15 minutes!
| MRC | Criteria | Characteristic |
|---|---|---|
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 ALL SECTIONS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 135.0 ALL SECTIONS |
| ADAQ | BODY LENGTH | 1.857 INCHES MAXIMUM |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR 1ST SECTION 0.25 FREE AIR 2ND SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 30.000 KILOHMS 1ST SECTION 9.700 KILOHMS 2ND SECTION |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 2.500 INCHES NOMINAL |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AEDX | SHAFT STYLE | ROUND |
| ABXF | SHAFT LENGTH | 0.592 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 3.302 INCHES NOMINAL |
| AEFZ | SHAFT RUNOUT | 0.002 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.00100 INCHES |
| TTQY | TERMINAL TYPE AND QUANTITY | 10 TURRET |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 102.681 1ST SECTION AND 205.722 1ST SECTION 720.027 2ND SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 1080.0 NOMINAL |
| FEAT | SPECIAL FEATURES | BUILT-IN 3.846KOHM TRIM RESISTOR BETWEEN TERMINALS EIGHT AND TEN |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| AAQL | BODY STYLE | CYLINDRICAL HOLE/SLOT MOUNTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 868.604 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.80 INCH-OUNCES |
| ABTD | MOUNTING SLOT WIDTH | 0.204 INCHES NOMINAL |
| AEFY | SHAFT END PLAY | 0.00500 INCHES |
| AEGA | LATERAL RUNOUT | 0.002 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.1 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAPN | SECTION QUANTITY | 2 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 1ST SECTION GRAPH 2ND SECTION LINEAR |
| TEST | TEST DATA DOCUMENT | 19207-12292881 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| AXGY | MOUNTING METHOD | SLOT |
| CRJS | FIXED TAP QUANTITY PER SECTION | 2 1ST SECTION 1 2ND SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -0.5 TO 0.5 OHMS ALL SECTIONS |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | -5.0 TO 5.0 -65 DEG CELSIUS ALL SECTIONS AND -4.0 TO 4.0 -15 DEG CELSIUS ALL SECTIONS AND -2.5 TO 2.5 50 DEG CELSIUS ALL SECTIONS AND -5.0 TO 5.0 75 DEG CELSIUS ALL SECTIONS AND -5.0 TO 5.0 105 DEG CELSIUS ALL SECTIONS AND -5.0 TO 5.0 125 DEG CELSIUS ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Are you looking for quote within 15 minutes for your desired part? Fill an instant form and receive lowest price quote guaranteed.
Request for Quote
