Are you looking for a quote on AA59457-1A1? If so, please fill out the provided quote form below. The NSN (national stock number) is 3413009263770, and the part AA59457-1A1 is drilling machine up by Delta Intl Machinery Corp. Please enter the given detail as much as possible, this information will help us to provide you the right quote to fulfill your needs. We will get back to you in less than 15 minutes!
| MRC | Criteria | Characteristic |
|---|---|---|
| ALYE | ROTATION REVERSIBILITY FEATURE | NOT INCLUDED |
| BTTB | SPINDLE SPEED RANGE IN RPM | 680.0 TO 4600.0 |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| BNRL | SPINDLE TRAVEL DISTANCE | 4.438 INCHES NOMINAL |
| BNRW | BASE WORKING SURFACE LENGTH | ANY ACCEPTABLE |
| BNRY | DRILLING CAPABILITY | 0.500 IN. CAST IRON |
| BNRZ | COLUMN TYPE | ROUND |
| BNSC | DRILL CHUCK SIZE ACCOMMODATED | 1/2 IN. KEY |
| BNSD | DISTANCE FROM SPINDLE CENTER TO COLUMN | 7.500 INCHES NOMINAL |
| BNSF | BASE WORKING SURFACE TYPE | SLOTTED |
| BNSG | BASE WORKING SURFACE SHAPE | RECTANGULAR |
| BNSH | BASE WORKING SURFACE AREA | 100.000 SQUARE INCHES |
| BNSL | BASE WORKING SURFACE MOUNTING LOCATION | BASE |
| BNSN | UPPER WORKING SURFACE TYPE | SLOTTED |
| BNSP | UPPER WORKING SURFACE SHAPE | RECTANGULAR |
| BNSQ | UPPER WORKING SURFACE AREA | 100.000 SQUARE INCHES |
| BNSS | UPPER WORKING SURFACE LENGTH | ANY ACCEPTABLE |
| BNSW | UPPER WORKING SURFACE ADJUSTMENT FEATURE | INCLUDED |
| BNSY | SWIVEL ADJUSTMENT IN DEG | 360.0 |
| BNSZ | TILT ADJUSTMENT DIRECTION AND ANGLE IN DEG | 40.0 RIGHT |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | SWITCH,PUSH BUTTON 1 |
| SR-1 | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | AA59457-1A1 |
| FAAZ | PHASE | SINGLE |
| ELEC | VOLTAGE IN VOLTS | 230.0 |
| AKSQ | FUNGUS RESISTANT TREATMENT | NOT INCLUDED |
| BWJN | UPPER WORKING SURFACE MOUNTING LOCATION | COLUMN |
| BWJP | MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO UPPER WORKING SURFACE | 42.313 INCHES |
| ALBH | RADIO INTERFERENCE SHIELDING | NOT PROVIDED |
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | A-A-59457 |
| AQDD | FEED TYPE | HAND |
| SR-1 | MANUFACTURERS CODE | 58536 |
| BNQL | MAIN DRIVE TYPE | ELECTRIC MOTOR |
| BNRK | SPINDLE SOCKET TAPER SIZE | 2 MORSE |
| BNRX | BASE WORKING SURFACE WIDTH | ANY ACCEPTABLE |
| BNSJ | BASE WORKING SURFACE DIAMETER | ANY ACCEPTABLE |
| BNSM | MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO BASE WORKING SURFACE | 47.250 INCHES |
| BNSR | UPPER WORKING SURFACE DIAMETER | ANY ACCEPTABLE |
| BNSX | UPPER WORKING SURFACE VERTICAL ADJUSTMENT | 42.313 INCHES NOMINAL |
| BQLR | SPINDLE TYPE | THREADED END FOR DRILL CHUCK |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| ACDC | CURRENT TYPE | AC |
| BTSZ | SPINDLE SPEED QUANTITY | 4 |
| AAXX | MOUNTING TYPE | FLOOR |
| BCRH | SPINDLE QUANTITY | 1 |
| AJGD | HEAD TYPE | FIXED |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Are you looking for quote within 15 minutes for your desired part? Fill an instant form and receive lowest price quote guaranteed.
Request for Quote
