Are you looking for a quote on 958HC? If so, please fill out the provided quote form below. The NSN (national stock number) is 5962010407034, and the part 958HC is microcircuit digita by General Dynamics Corp. Please enter the given detail as much as possible, this information will help us to provide you the right quote to fulfill your needs. We will get back to you in less than 15 minutes!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5962-01-040-7034 Item Description: Microcircuit Digita | 5962 | 010407034 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | G | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 958hc | 1 | 8 | E |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADAR | BODY OUTSIDE DIAMETER | 0.335 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM |
| AEHX | MAXIMUM POWER DISSIPATION RATING | 200.0 MILLIWATTS |
| AFGA | OPERATING TEMP RANGE | -30.0/+85.0 DEG CELSIUS |
| AFJQ | STORAGE TEMP RANGE | -65.0/+150.0 DEG CELSIUS |
| AGAV | END ITEM IDENTIFICATION | TRANSMITTER,RADIO TYPE T-827/URT |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND W/ENABLE AND RESETTABLE AND W/CLEAR AND EDGE TRIGGERED |
| CQSJ | INCLOSURE MATERIAL | GLASS AND METAL |
| CQSZ | INCLOSURE CONFIGURATION | CAN |
| CQWX | OUTPUT LOGIC FORM | COMPLEMENTARY-LOGIC |
| CQZP | INPUT CIRCUIT PATTERN | 6 INPUT |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | T0-99 JOINT ELECTRON DEVICE ENGINEERING COUNCIL |
| CWSG | TERMINAL SURFACE TREATMENT | GOLD |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 4.0 VOLTS MAXIMUM POWER SOURCE |
| CZEQ | TIME RATING PER CHACTERISTIC | 300.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINALS GOLD |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TEST | TEST DATA DOCUMENT | 06845-4013371 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 8 PIN |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Are you looking for quote within 15 minutes for your desired part? Fill an instant form and receive lowest price quote guaranteed.
Request for Quote
