Are you looking for a quote on 2J1SC1? If so, please fill out the provided quote form below. The NSN (national stock number) is 5990000813357, and the part 2J1SC1 is synchro control tra by General Dynamics Global Imaging. Please enter the given detail as much as possible, this information will help us to provide you the right quote to fulfill your needs. We will get back to you in less than 15 minutes!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-081-3357 Item Description: Synchro Control Tra | 5990 | 000813357 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| 7 | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2j1sc1 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL, CORROSION RESISTING |
| AAQL | BODY STYLE | STANDARD ROUND D |
| AAVH | SHOULDER DIAMETER | 1.2400 INCHES MINIMUM AND 1.2600 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 1.0625 INCHES MINIMUM AND 1.0630 INCHES MAXIMUM |
| AAZW | SECOND SHOULDER DIAMETER | 1.9540 INCHES MINIMUM AND 1.9600 INCHES MAXIMUM |
| AAZX | SECOND SHOULDER LENGTH | 0.0600 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 4.3180 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 2.2480 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.2450 INCHES MINIMUM AND 0.2550 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 1.9400 INCHES MINIMUM AND 1.9600 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1555 INCHES MINIMUM SINGLE SHAFT AND 0.1560 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.3650 INCHES MINIMUM SINGLE SHAFT AND 0.3850 INCHES MAXIMUM SINGLE SHAFT |
| AFJN | III FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 23 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 105.0 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 41.0 MILLIAMPERES NOMINAL |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 1.0 WATTS NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 60.0 NOMINAL |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWG | III SHAFT MAXIMUM RADIAL PLAY | 0.0020 INCHES |
| AJWQ | PILOT LENGTH | 0.1100 INCHES MINIMUM AND 0.1300 INCHES MAXIMUM |
| AJWR | SHOULDER LENGTH | 0.0500 INCHES MINIMUM AND 0.0700 INCHES MAXIMUM |
| AJWV | AFT OF FIRST FLANGE DIAMETER | 2.2480 INCHES MINIMUM AND 2.2520 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.6330 INCHES MAXIMUM |
| AJXB | III SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNC SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.1820 INCHES MINIMUM SINGLE SHAFT AND 0.1920 INCHES MAXIMUM SINGLE SHAFT |
| CRSJ | SHAFT TYPE | ROUND, STEPPED, THREADED SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1560 INCHES MINIMUM AND 0.8440 INCHES MAXIMUM |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.112 INCHES |
| CSSD | SHAFT STEP DIAMETER | 0.1200 INCHES MINIMUM AND 0.1300 INCHES MAXIMUM SINGLE SHAFT |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8440 INCHES MINIMUM AND 0.8480 INCHES MAXIMUM |
| CTJB | SHAFT STEP LENGTH | 0.1820 INCHES MINIMUM AND 0.1920 INCHES MAXIMUM SINGLE SHAFT |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.125 INCHES SINGLE SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Are you looking for quote within 15 minutes for your desired part? Fill an instant form and receive lowest price quote guaranteed.
Request for Quote
