Are you looking for a quote on VRB15-204A30? If so, please fill out the provided quote form below. The NSN (national stock number) is 5990008240222, and the part VRB15-204A30 is resolver electrical by General Dynamics Global Imaging. Please enter the given detail as much as possible, this information will help us to provide you the right quote to fulfill your needs. We will get back to you in less than 15 minutes!
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | STANDARD ROUND B |
| TTQY | TERMINAL TYPE AND QUANTITY | 12 SCREW |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.2000 INCHES NOMINAL SINGLE SHAFT |
| AJSL | BODY SIZE | 15 |
| AAFZ | BODY MATERIAL | STEEL, CORROSION RESISTING |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES MINIMUM |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 6.5 MILLIAMPERES MAXIMUM |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 20.0 MILLIWATTS MAXIMUM |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOT RATED |
| CWXK | III SHAFT RADIAL PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| CWYF | III SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | NOT RATED |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | NOT RATED |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | 2550.00 NOMINAL |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | 79.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 320.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 390.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 8.500 INPUT TO OUTPUT NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.1000 INCHES NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 8.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 15.00 |
| AJVK | OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.1 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS MAXIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWE | III SHAFT RADIAL PLAY TEST POINT | 0.432 INCHES MINIMUM |
| AJWH | III SHAFT END PLAY | 0.0015 INCHES MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0400 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.9190 INCHES MAXIMUM |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| AJXB | III SHAFT MAXIMUM RUNOUT | 0.0008 INCHES |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| ABHP | OVERALL LENGTH | 2.4560 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.5000 INCHES NOMINAL SINGLE SHAFT |
| ABPC | UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| AAVH | SHOULDER DIAMETER | 1.3120 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.8750 INCHES MAXIMUM |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| ABKK | FLANGE DIAMETER | 1.4370 INCHES NOMINAL |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Are you looking for quote within 15 minutes for your desired part? Fill an instant form and receive lowest price quote guaranteed.
Request for Quote
