Are you looking for a quote on VTR11 18-4C? If so, please fill out the provided quote form below. The NSN (national stock number) is 5990009279751, and the part VTR11 18-4C is synchro receiver by General Dynamics Global Imaging. Please enter the given detail as much as possible, this information will help us to provide you the right quote to fulfill your needs. We will get back to you in less than 15 minutes!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-927-9751 Item Description: Synchro Receiver | 5990 | 009279751 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Vtr11 18-4c | C | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL, CORROSION RESISTING |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.3390 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1870 INCHES MINIMUM FRONT SHAFT AND 0.1872 INCHES MAXIMUM FRONT SHAFT |
| ABXF | SHAFT LENGTH | 0.5450 INCHES MINIMUM FRONT SHAFT AND 0.5560 INCHES MAXIMUM FRONT SHAFT |
| AEBZ | III SCHEMATIC DIAGRAM DESIGNATOR | 1 Y-ROTOR, 1 STATOR |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 60.0 MILLIAMPERES NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 1.1 WATTS NOMINAL |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | 2060.00 NOMINAL |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | 80.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 159.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 137.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 5.300 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 45.00 INPUT |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 0.009 INCH-OUNCES MINIMUM |
| AJWE | SHAFT RADIAL PLAY TEST POINT | 0.125 INCHES NOMINAL |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0006 INCHES |
| AJWH | SHAFT END PLAY | 0.0005 INCHES MINIMUM AND 0.0015 INCHES MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| AJWR | SHOULDER LENGTH | 0.0580 INCHES MINIMUM AND 0.0810 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7820 INCHES NOMINAL |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0008 INCHES |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF FRONT SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND FRONT SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A FRONT SHAFT |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.2000 INCHES NOMINAL FRONT SHAFT |
| CRSJ | SHAFT TYPE | ROUND, THREADED FRONT SHAFT |
| CSJY | TRANSFORMATION RATIO | 0.767 ROTOR TO STATOR MINIMUM AND 0.799 ROTOR TO STATOR MAXIMUM |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.190 INCHES FRONT SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Are you looking for quote within 15 minutes for your desired part? Fill an instant form and receive lowest price quote guaranteed.
Request for Quote
