Are you looking for a quote on 304264-2? If so, please fill out the provided quote form below. The NSN (national stock number) is 5962010286117, and the part 304264-2 is microcircuit digita by General Instrument Corporation. Please enter the given detail as much as possible, this information will help us to provide you the right quote to fulfill your needs. We will get back to you in less than 15 minutes!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5962-01-028-6117 Item Description: Microcircuit Digita | 5962 | 010286117 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 304264-2 | 3 | 1 | C | 9 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADAQ | BODY LENGTH | 0.870 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.120 INCHES MINIMUM AND 0.185 INCHES MAXIMUM |
| AEHX | MAXIMUM POWER DISSIPATION RATING | 50.0 MILLIWATTS |
| AFGA | OPERATING TEMP RANGE | -55.0/+125.0 DEG CELSIUS |
| AFJQ | STORAGE TEMP RANGE | -65.0/+150.0 DEG CELSIUS |
| AGAV | END ITEM IDENTIFICATION | SIGNAL PROCESSOR FSCM 15786 |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND LOW POWER AND POSITIVE OUTPUTS AND RESETTABLE AND RETRIGGERABLE AND EDGE TRIGGERED |
| CQSJ | INCLOSURE MATERIAL | CERAMIC AND GLASS |
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| CQWX | OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC |
| CQZP | INPUT CIRCUIT PATTERN | DUAL 4 INPUT |
| CSSL | DESIGN FUNCTION AND QUANTITY | 2 MULTIVIBRATOR, MONOSTABLE |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | -0.5 VOLTS MINIMUM POWER SOURCE AND 5.5 VOLTS MAXIMUM POWER SOURCE |
| CZEQ | TIME RATING PER CHACTERISTIC | 75.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT |
| TEST | TEST DATA DOCUMENT | 15786-304264 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
| TTQY | TERMINAL TYPE AND QUANTITY | 16 PRINTED CIRCUIT |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Are you looking for quote within 15 minutes for your desired part? Fill an instant form and receive lowest price quote guaranteed.
Request for Quote
