Are you looking for a quote on SP1732? If so, please fill out the provided quote form below. The NSN (national stock number) is 3010012582316, and the part SP1732 is gearcase motor by Harris Corporation. Please enter the given detail as much as possible, this information will help us to provide you the right quote to fulfill your needs. We will get back to you in less than 15 minutes!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3010-01-258-2316 Item Description: Gearcase Motor | 3010 | 012582316 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Sp1732 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJT | OVERALL HEIGHT | 2.375 INCHES |
| AAJU | III OVERALL LENGTH | 3.531 INCHES |
| AAJV | OVERALL WIDTH | 2.375 INCHES |
| ABWV | SHAFT DIAMETER | 0.230 INCHES NOMINAL SINGLE END |
| ACDC | CURRENT TYPE | AC INPUT |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END OR COUNTERCLOCKWISE SINGLE END |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | INCLOSURE FEATURE | GENERAL PURPOSE |
| AXCP | WINDING TYPE | PERMANENT MAGNET AND SYNCHRONOUS |
| AXGY | MOUNTING METHOD | FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | OFFSET ABOVE PARALLEL TO SHAFT AXIS SINGLE END |
| BFMF | COOLING METHOD | OIL |
| BKPH | TORQUE RATING AND TYPE | 210.0 INCH-OUNCES RUNNING |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CNXS | POWER RATING | 7.000 WATTS INPUT |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 1.000 INCHES SINGLE END |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | 1.344 INCHES |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.906 INCHES |
| CWGD | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.906 INCHES |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | 6.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| CWHR | ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| CWHZ | SHAFT END CHARACTERISTIC | A1 SINGLE STYLE SINGLE END |
| FREQ | FREQUENCY IN HERTZ | 60.0 INPUT |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Are you looking for quote within 15 minutes for your desired part? Fill an instant form and receive lowest price quote guaranteed.
Request for Quote
