Are you looking for a quote on 7740-22-4? If so, please fill out the provided quote form below. The NSN (national stock number) is 3040005129223, and the part 7740-22-4 is shaft straight by Heil Environmental Industries. Please enter the given detail as much as possible, this information will help us to provide you the right quote to fulfill your needs. We will get back to you in less than 15 minutes!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-512-9223 Item Description: Shaft Straight | 3040 | 005129223 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 7740-22-4 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | TWO WOODRUFF KEYWAYS AND CROSS DRILLED HOLE |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | TWO WOODRUFF KEYWAYS AND CROSS DRILLED HOLE |
| ABHP | OVERALL LENGTH | 11.000 INCHES NOMINAL |
| AMCZ | FIRST END KEYWAY WIDTH | 0.1880 INCHES NOMINAL |
| AMDE | FIRST END EXTERNAL KEYWAY LENGTH | 1.250 INCHES NOMINAL |
| AMDH | FIRST END DISTANCE FROM KEYWAY CENTER TO END | 1.000 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 1.9970 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM |
| AMDX | FIRST END HOLE DIAMETER | 0.1250 INCHES NOMINAL |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 1.000 INCHES NOMINAL |
| AMFE | FIRST END ANGLE BETWEEN KEYWAYS | 180.0 DEGREES NOMINAL |
| AMFR | SECOND END KEYWAY WIDTH | 0.1880 INCHES NOMINAL |
| AMFS | SECOND END EXTERNAL KEYWAY LENGTH | 1.250 INCHES NOMINAL |
| AMFW | SECOND END DISTANCE FROM KEYWAY CENTER TO END | 1.000 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 1.9970 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM |
| AMGS | SECOND END HOLE DIAMETER | 0.1880 INCHES NOMINAL |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 1.000 INCHES NOMINAL |
| AMHY | SECOND END ANGLE BETWEEN KEYWAYS | 180.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | FIRST END PARTIAL BORE 10.250 IN. DP;FIRST END INT THD 0.375 IN. LG |
| MATT | MATERIAL | STEEL COMP 1113 OR STEEL COMP 1116 OR STEEL COMP 1117 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 MIL SPEC ALL MATERIAL RESPONSES |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Are you looking for quote within 15 minutes for your desired part? Fill an instant form and receive lowest price quote guaranteed.
Request for Quote
