Are you looking for a quote on 1006886M1? If so, please fill out the provided quote form below. The NSN (national stock number) is 3020002002107, and the part 1006886M1 is gear helical by Massey Ferguson Manufacturing Co Ltd. Please enter the given detail as much as possible, this information will help us to provide you the right quote to fulfill your needs. We will get back to you in less than 15 minutes!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-200-2107 Item Description: Gear Helical | 3020 | 002002107 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1006886m1 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | SPOKED |
| AGJS | PITCH DIAMETER | 6.0240 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 48 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 6.216 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWPZ | HELIX ANGLE | 37.1734 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.156 INCHES FIRST END |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.313 INCHES SECOND END |
| CWRM | FACE NOMINAL WIDTH | 1.063 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 1.0003 INCHES FIRST END |
| CWSN | KEYWAY NOMINAL WIDTH | 0.1584 INCHES FIRST END |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.5953 INCHES FIRST END |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 1.875 INCHES SECOND END |
| CWWH | END NOMINAL LENGTH | 0.2812 INCHES FIRST END |
| CWWN | END NOMINAL DIAMETER | 1.875 INCHES FIRST END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.2812 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 0.0625 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | TIMING MARK ON 1ST SIDE 170 DEG 26 MIN 51 SEC CCW FROM KEYWAY,TIMING MARK ON 2ND SIDE 116 DEG 34 MIN CCW FROM TIMING MARK ON 1ST SIDE,2 HOLES 5/32 IN. DIA,ONE LOCATED OVER KEYWAY,180 DEG APART |
| MATT | III MATERIAL | IRON OVERALL |
| STYL | STYLE DESIGNATOR | ONE PROTRUDING HUB, ONE RECESSED HUB |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Are you looking for quote within 15 minutes for your desired part? Fill an instant form and receive lowest price quote guaranteed.
Request for Quote
