Are you looking for a quote on TGH-11-CS-4? If so, please fill out the provided quote form below. The NSN (national stock number) is 5990010859117, and the part TGH-11-CS-4 is synchro transmitter by Moog Inc. Please enter the given detail as much as possible, this information will help us to provide you the right quote to fulfill your needs. We will get back to you in less than 15 minutes!
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL, CORROSION RESISTING |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 0.8123 INCHES NOMINAL |
| AAVL | PILOT DIAMETER | 0.6250 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 2.0610 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 1.0620 INCHES NOMINAL |
| ABKU | FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0450 INCHES MINIMUM |
| ABWV | SHAFT DIAMETER | 0.1200 INCHES NOMINAL SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.3120 INCHES NOMINAL SINGLE SHAFT |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 264.0 MILLIAMPERES NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 1.1 WATTS NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 16.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 3.70 NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 22.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 8.50 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 3.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 5.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 30.00 INPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 70.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0/+7.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 9.0 CENTIMETER-GRAMS NOMINAL |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS NOMINAL |
| AJWQ | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6870 INCHES NOMINAL |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 107.00 NOMINAL |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 18.10 NOMINAL |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 8.90 NOMINAL |
| CRSJ | SHAFT TYPE | ROUND SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 0.465 ROTOR TO STATOR NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Are you looking for quote within 15 minutes for your desired part? Fill an instant form and receive lowest price quote guaranteed.
Request for Quote
