Are you looking for a quote on 5BA10FJ449? If so, please fill out the provided quote form below. The NSN (national stock number) is 6105003426314, and the part 5BA10FJ449 is motor direct curren by Navair And Navsea Managed. Please enter the given detail as much as possible, this information will help us to provide you the right quote to fulfill your needs. We will get back to you in less than 15 minutes!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 6105-00-342-6314 Item Description: Motor Direct Curren | 6105 | 003426314 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5ba10fj449 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJT | OVERALL HEIGHT | 1.600 INCHES |
| AAJU | III OVERALL LENGTH | 5.239 INCHES |
| AAJV | OVERALL WIDTH | 1.600 INCHES |
| ABWV | SHAFT DIAMETER | 0.1870 INCHES NOMINAL SINGLE END |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END OR COUNTERCLOCKWISE SINGLE END |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | INCLOSURE FEATURE | OPEN PROTECTED |
| AXCP | WINDING TYPE | SERIES WOUND |
| AXGY | MOUNTING METHOD | CLAMP RING |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 1 CLAMP COLLAR |
| BFMF | COOLING METHOD | NATURAL CONVECTION VENTILATED |
| BFMR | KEYWAY CENTER TO SHAFT END DISTANCE | 0.2270 INCHES NOMINAL SINGLE END |
| BKPH | TORQUE RATING AND TYPE | 10.0 INCH-OUNCES RUNNING |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CNXS | POWER RATING | 19.5000 WATTS OUTPUT |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 0.455 INCHES SINGLE END |
| CWDY | TEMP RATING | 80.0 OPERATING DEG FAHRENHEIT |
| CWFX | ROTOR SPEED RATING IN RPM | 120.0 SINGLE FULL LOAD |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 24.0 LINE TO NEUTRAL SINGLE INPUT |
| CWHZ | SHAFT END CHARACTERISTIC | A11 SINGLE STYLE SINGLE END |
| FEAT | SPECIAL FEATURES | SHAFT GROOVED,0.017 IN. MIN,0.019 IN. MAX WIDE,TO 0.1735 IN. MIN,0.1765 IN. MAX DIA SHAFT,0.030 IN. MIN,0.032 IN. MAX FROM END OF SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Are you looking for quote within 15 minutes for your desired part? Fill an instant form and receive lowest price quote guaranteed.
Request for Quote
