Are you looking for a quote on 20405? If so, please fill out the provided quote form below. The NSN (national stock number) is 3130008385260, and the part 20405 is bearing unit roller by P T Components Inc. Please enter the given detail as much as possible, this information will help us to provide you the right quote to fulfill your needs. We will get back to you in less than 15 minutes!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-00-838-5260 Item Description: Bearing Unit Roller | 3130 | 008385260 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 20405 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTD | MOUNTING SLOT WIDTH | 0.6250 INCHES NOMINAL |
| ABVG | MOUNTING SLOT LENGTH | 1.3125 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 2.1875 INCHES NOMINAL |
| ACYB | BASE THICKNESS | 1.0000 INCHES NOMINAL |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 8.8125 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 11.0000 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | PIPE PLUG |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 2 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AMCL | BLOCK TYPE | FIXED |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 3.0000 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 30.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | ADAPTER |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| MATT | MATERIAL | IRON CAST HOUSING |
| MATT | MATERIAL | STEEL SEAL |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK, OPTIONAL SPLIT |
| AFWC | HOUSING HEIGHT | 5.9375 INCHES NOMINAL |
| AFWD | HOUSING LENGTH | 4.3750 INCHES NOMINAL |
| AGNF | BASE LENGTH | 3.1250 INCHES NOMINAL |
| AHZC | ASSEMBLY OVERALL LENGTH | 4.3750 INCHES NOMINAL |
| AKRF | SEAL TYPE | LABYRINTH |
| ANJS | SHAFT END TYPE | OPEN |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| FEAT | SPECIAL FEATURES | DRAIN PLUG LOCATED ON BOTH SIDES OF THE HOUSING |
| LBMA | LUBRICATION MATERIAL | GREASE |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Are you looking for quote within 15 minutes for your desired part? Fill an instant form and receive lowest price quote guaranteed.
Request for Quote
