Are you looking for a quote on PIC-6016? If so, please fill out the provided quote form below. The NSN (national stock number) is 5962010744117, and the part PIC-6016 is microcircuit linear by Rantec Power Systems Inc. Please enter the given detail as much as possible, this information will help us to provide you the right quote to fulfill your needs. We will get back to you in less than 15 minutes!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5962-01-074-4117 Item Description: Microcircuit Linear | 5962 | 010744117 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | U | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Pic-6016 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADAQ | BODY LENGTH | 1.543 INCHES MINIMUM AND 1.573 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 1.030 INCHES MINIMUM AND 1.050 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.250 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| AEHX | MAXIMUM POWER DISSIPATION RATING | 62.0 WATTS |
| AFGA | OPERATING TEMP RANGE | -55.0/+125.0 DEG CELSIUS |
| AFJQ | STORAGE TEMP RANGE | -65.0/+150.0 DEG CELSIUS |
| AGAV | END ITEM IDENTIFICATION | LANDING CONTROL CENTRAL TYPE AN/TPN-19 |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND HYBRID AND POSITIVE OUTPUTS |
| CQSJ | INCLOSURE MATERIAL | GLASS AND METAL |
| CQSZ | INCLOSURE CONFIGURATION | CAN |
| CQZP | INPUT CIRCUIT PATTERN | 2 INPUT |
| CSSL | DESIGN FUNCTION AND QUANTITY | 1 REGULATOR, SWITCHING |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | T0-3 JOINT ELECTRON DEVICE ENGINEERING COUNCIL |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 80.0 VOLTS MAXIMUM POWER SOURCE |
| CZEQ | TIME RATING PER CHACTERISTIC | 150.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT AND 300.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT |
| TEST | TEST DATA DOCUMENT | 04971-109499 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Are you looking for quote within 15 minutes for your desired part? Fill an instant form and receive lowest price quote guaranteed.
Request for Quote
