Are you looking for a quote on 116FTS259? If so, please fill out the provided quote form below. The NSN (national stock number) is 5905000564295, and the part 116FTS259 is resistor variable n by Sensor Systems L L C. Please enter the given detail as much as possible, this information will help us to provide you the right quote to fulfill your needs. We will get back to you in less than 15 minutes!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-056-4295 Item Description: Resistor Variable N | 5905 | 000564295 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | U | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 116fts259 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 11 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.9688 INCHES NOMINAL |
| AAVM | PILOT LENGTH | 0.6200 INCHES NOMINAL |
| ABNB | FIRST FLAT LENGTH | 0.375 INCHES NOMINAL |
| ABNC | FLAT HEIGHT | 0.105 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.968 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 1.062 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1247 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.437 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 2.680 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 1.0750 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND, FLATTED |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 340.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 3.45 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 3.45 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 32.00 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.005 INCHES |
| AEFZ | SHAFT RUNOUT | 0.002 INCHES |
| AEGA | LATERAL RUNOUT | 0.001 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 PERCENT, RATED AMPERES C AND BETTER FINISH |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.0 PERCENT, RATED AMPERES C SELECT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS 6TH SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS 8TH SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 PERCENT, RATED AMPERES C DROP SIDING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 PERCENT, RATED AMPERES C FLOORING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 30.0 KILOHMS 10TH SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 30.0 PERCENT, RATED AMPERES C AND BETTER SELECT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 30.0 PERCENT, RATED AMPERES FOUNDATION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 7.5 KILOHMS 2ND SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 7.5 KILOHMS 4TH SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 156.36 5TH SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 156.36 6TH SECTION AND 232.72 6TH SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 156.36 7TH SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 156.36 8TH SECTION AND 232.72 8TH SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 38.17 2ND SECTION AND 87.27 2ND SECTION AND 136.37 2ND SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 38.17 4TH SECTION AND 87.27 4TH SECTION AND 136.37 4TH SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 1ST SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.30/+0.30 11TH SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.65 TO 0.65 10TH SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.65 TO 0.65 3RD SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00/+1.00 2ND SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00/+1.00 4TH SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.50 TO 1.50 5TH SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.50 TO 1.50 8TH SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.50/+1.50 6TH SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.50/+1.50 7TH SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -2.00/+2.00 9TH SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 100.0 ALL SECTIONS |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -400.0/+400.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 5TH SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 7TH SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 2 6TH SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 2 8TH SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 3 2ND SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 3 4TH SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -2.0 TO 2.0 DEG ANGULAR ROTATION ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS EQUATION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 ALL SECTIONS |
| TEST | TEST DATA DOCUMENT | 97942-577R900 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 45 TURRET |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Are you looking for quote within 15 minutes for your desired part? Fill an instant form and receive lowest price quote guaranteed.
Request for Quote
