Are you looking for a quote on 743-6181? If so, please fill out the provided quote form below. The NSN (national stock number) is 5905008325237, and the part 743-6181 is resistor variable n by Sensor Systems L L C. Please enter the given detail as much as possible, this information will help us to provide you the right quote to fulfill your needs. We will get back to you in less than 15 minutes!
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 7 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 2.8750 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0550 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 5.780 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 2.875 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0600 INCHES MINIMUM |
| ABWV | SHAFT DIAMETER | 0.250 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.750 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 5.000 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 3.364 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 3.0050 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0980 INCHES MAXIMUM |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGA | LATERAL RUNOUT | 0.003 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 PERCENT, RATED AMPERES C AND BETTER FINISH |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 PERCENT, RATED AMPERES C AND BETTER SELECT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 PERCENT, RATED AMPERES C DROP SIDING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.0 PERCENT, RATED AMPERES C AND BETTER V.G. STEPPING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 570.0 OHMS C AND BETTER INDUSTRIAL CLEARS |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.02/+0.02 ALL SECTIONS |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 3 3RD SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | +0.0/+20.0 3RD SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | +0.0/+20.0 7TH SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -0.5/+0.5 6TH SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 1ST SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 4TH SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0/+20.0 2ND SECTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS TABLE |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 ALL SECTIONS |
| ABPM | BODY DIAMETER | 3.125 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND |
| AEFK | MAXIMUM STARTING TORQUE | 7.00 INCH-OUNCES |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 PERCENT, RATED AMPERES C FINISH |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 7.0 PERCENT, RATED AMPERES C FLOORING |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -400.0/+400.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR ALL SECTIONS |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 4TH SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 2 5TH SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | +0.0/+20.0 5TH SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| TEST | TEST DATA DOCUMENT | 19200-10545461 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
| TTQY | TERMINAL TYPE AND QUANTITY | 27 TURRET |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Are you looking for quote within 15 minutes for your desired part? Fill an instant form and receive lowest price quote guaranteed.
Request for Quote
