Are you looking for a quote on MDH20-10 1869? If so, please fill out the provided quote form below. The NSN (national stock number) is 5905008879469, and the part MDH20-10 1869 is resistor variable w by Sensor Systems L L C. Please enter the given detail as much as possible, this information will help us to provide you the right quote to fulfill your needs. We will get back to you in less than 15 minutes!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-887-9469 Item Description: Resistor Variable W | 5905 | 008879469 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Mdh20-10 1869 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.1875 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.812 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 1.812 INCHES MAXIMUM |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| ABWV | SHAFT DIAMETER | 0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.462 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 4.000 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 2.0050 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.250 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 3.50 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 3.00 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.0025 INCHES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGA | LATERAL RUNOUT | 0.005 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.0015 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.004 INCHES |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.5 |
| APXH | TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS ALL SECTIONS |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 1800.0 ALL SECTIONS |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3780.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.033/+0.033 2ND SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.066/+0.066 1ST SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 5.0 FREE AIR ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -1.0/+1.0 DEG ANGULAR ROTATION ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS GRAPH |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 ALL SECTIONS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 06481-900217-113 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING D |
| TTQY | TERMINAL TYPE AND QUANTITY | 8 TAB, SOLDER LUG |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Are you looking for quote within 15 minutes for your desired part? Fill an instant form and receive lowest price quote guaranteed.
Request for Quote
