Are you looking for a quote on DG501AP 883C? If so, please fill out the provided quote form below. The NSN (national stock number) is 5962010776118, and the part DG501AP 883C is microcircuit memory by Siliconix Incorporated. Please enter the given detail as much as possible, this information will help us to provide you the right quote to fulfill your needs. We will get back to you in less than 15 minutes!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5962-01-077-6118 Item Description: Microcircuit Memory | 5962 | 010776118 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| 7 | B | U | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Dg501ap 883c | 1 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADAQ | BODY LENGTH | 0.840 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM |
| AEHX | MAXIMUM POWER DISSIPATION RATING | 450.0 MILLIWATTS |
| AFGA | OPERATING TEMP RANGE | -55.0/+125.0 DEG CELSIUS |
| AFJQ | STORAGE TEMP RANGE | -65.0/+150.0 DEG CELSIUS |
| CBBL | FEATURES PROVIDED | MONOLITHIC AND NEGATIVE OUTPUTS AND POSITIVE OUTPUTS AND W/ENABLE |
| CQSJ | INCLOSURE MATERIAL | CERAMIC AND GLASS |
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| CQWX | OUTPUT LOGIC FORM | N-TYPE METAL OXIDE-SEMICONDUCTOR LOGIC |
| CQZP | INPUT CIRCUIT PATTERN | 8 INPUT |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | D-2 MIL-M-38510 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 5.0 VOLTS MAXIMUM POWER SOURCE |
| CZEQ | TIME RATING PER CHACTERISTIC | 1500.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT AND 2500.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT |
| CZER | MEMORY DEVICE TYPE | ROM |
| TEST | TEST DATA DOCUMENT | 15942-0213-1-1150-2 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNIN |
| TTQY | TERMINAL TYPE AND QUANTITY | 16 PRINTED CIRCUIT |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Are you looking for quote within 15 minutes for your desired part? Fill an instant form and receive lowest price quote guaranteed.
Request for Quote
