Are you looking for a quote on S54107F? If so, please fill out the provided quote form below. The NSN (national stock number) is 5962010428053, and the part S54107F is microcircuit digita by Texas Instruments Incorporated. Please enter the given detail as much as possible, this information will help us to provide you the right quote to fulfill your needs. We will get back to you in less than 15 minutes!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5962-01-042-8053 Item Description: Microcircuit Digita | 5962 | 010428053 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| S54107f | 3 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADAQ | BODY LENGTH | 0.660 INCHES MINIMUM AND 0.785 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| AEHX | MAXIMUM POWER DISSIPATION RATING | 220.0 MILLIWATTS |
| AFGA | OPERATING TEMP RANGE | -55.0/+125.0 DEG CELSIUS |
| AFJQ | STORAGE TEMP RANGE | -65.0/+150.0 DEG CELSIUS |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND MEDIUM SPEED AND MEDIUM POWER AND EDGE TRIGGERED AND W/CLEAR AND W/ENABLE |
| CQSJ | INCLOSURE MATERIAL | CERAMIC AND GLASS |
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| CQWX | OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC |
| CQZP | INPUT CIRCUIT PATTERN | DUAL 4 INPUT |
| CSSL | DESIGN FUNCTION AND QUANTITY | 2 FLIP-FLOP, J-K, CLOCKED AND 2 FLIP-FLOP, J-K, MASTER SLAVE |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | T0-116 JOINT ELECTRON DEVICE ENGINEERING COUNCIL |
| CZEQ | TIME RATING PER CHACTERISTIC | 25.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT AND 40.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT |
| TEST | TEST DATA DOCUMENT | 06481-971060 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Are you looking for quote within 15 minutes for your desired part? Fill an instant form and receive lowest price quote guaranteed.
Request for Quote
