Are you looking for a quote on SPB-20-OPN-MODIFIED? If so, please fill out the provided quote form below. The NSN (national stock number) is 3130013182101, and the part SPB-20-OPN-MODIFIED is bearing unit ball by Thomson Industries Inc. Please enter the given detail as much as possible, this information will help us to provide you the right quote to fulfill your needs. We will get back to you in less than 15 minutes!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-01-318-2101 Item Description: Bearing Unit Ball | 3130 | 013182101 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Spb-20-Opn-Modified | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | 0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 1.2500 INCHES NOMINAL |
| ACYB | BASE THICKNESS | 0.407 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 3.490 INCHES MINIMUM AND 3.510 INCHES MAXIMUM |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM |
| AFWC | HOUSING HEIGHT | 2.500 INCHES MINIMUM AND 2.624 INCHES MAXIMUM |
| AFWD | HOUSING LENGTH | 3.250 INCHES MINIMUM AND 3.500 INCHES MAXIMUM |
| AFWE | HOUSING WIDTH | 3.938 INCHES MINIMUM AND 4.062 INCHES MAXIMUM |
| AGKL | LUBRICATION FITTING TYPE | SELF LUBRICATED |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 1.497 INCHES MINIMUM AND 1.503 INCHES MAXIMUM |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 HOUSING |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL BEARING |
| SFTT | SURFACE TREATMENT | PLASTIC POLYURETHANE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83286 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK, OPEN, ADJUSTABLE DIAMETER |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Are you looking for quote within 15 minutes for your desired part? Fill an instant form and receive lowest price quote guaranteed.
Request for Quote
